Monitors the state of electricity on the coast remotely using the OnDeck hub and one of these sensors.
Choose the wired option to connect directly to the AC power supply without the need for an outlet. This wired product works with 90-264 V AC input and has an output voltage of 5 V DC.
Choose the option with AC power plug to connect to a power outlet. The option with AC power plug is compatible with the power outlets of North America, Europe, the United Kingdom and Australia between 100 V AC and 240 V AC, and has an output voltage of 5 V DC.
FAQs
All connection linkages must be water tight, or water intrusion may damage the sensor and OnDeck system.
The AC mains input should use an overcurrent device, like a fuse or circuit breaker, within 175 mm (7 in.) of the source, rated at least 2 A but not exceeding 5 A.
Any wiring added to the sensor must be 18 AWG (0.82 mm²) or larger for safe operation.
Use crimp connectors or other ABYC approved connectors to connect the sensor to the AC mains.
Connect red (sensor DC+) to the white/blue Shore Power wire, and black (sensor DC-) to the Ground wire on the IN/OUT harness.
Never connect the OnDeck IN/OUT wiring harness directly to the AC mains; this will damage the system and may cause injury.
The maximum AC input current is 25 mA in steady-state when connected to the OnDeck system.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
