Use this Garmin marine network cable to connect compatible Garmin devices over the marine network in a clean, reliable installation.
Reference: Conector RJ45 para red Garmin
- Designed for Garmin marine network connectivity.
- Useful for replacement, extension, or new compatible installations.
FAQs
Arrange the individual wires in the correct order according to side A or B, using the provided table for reference.
Slit the jacket 16 mm from the cut end, trim the drain wire to 14 mm, and arrange wires as per instructions before proceeding.
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding, and check the opposite side before cutting.
Screw the strain relief nut onto the cable-connection housing and tighten with a 15 mm wrench. Do not overtighten the nut.
The brown wire will always be in position 8.
The Garmin Marine Network requires cross-over cables not exceeding 100 m between devices.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
