Get extremely clear probe images of objects, structures and fish that are under and on the sides of your boat thanks to this 12-rod transducer that is mounted through the stainless steel wheeled hull.
This transducer with built-in fast-response temperature sensor has a power of 500 W per unit (1,500 W in total), a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) and a CHIRP operating frequency of 455/800 kHz¹;. It is suitable for helmet strut angles of less than 5 degrees. Link it with your GCV™ 10 scanning probe module.
Includes translator with stainless steel wheel, fairing block, insulation bushings and plate, extension cable, assembly components and installation instructions. Follow the instructions carefully to avoid damage to the boat.
¹CHIRP frequency bandwidth: 445 to 475 kHz and 805 to 840 kHz.
Specifications:
| Physical And Performance Characteristics | |
|---|---|
| Frequency | ClearVü/SideVü CHIRP 455 kHz (425-485 kHz) & 800 kHz (790-850 kHz) |
| Energy | ClearVü/SideVü 500 W |
| Beam Width | ClearVü: 1.4°x53° @ 455 kHz and 0.8°x30° @ 800 kHz SideVü: 1.1°x53° @ 455 kHZ and 0.7°x30° @ 800 kHz |
| Maximum Depth | ClearVü: 750 ft.; SideVü: 500 ft. |
| Cable Length | 5 ft. + 30 ft. y-extension Cable |
| DEPTH/SPEED/TEMPERATURE | Depth and Temperature |
| Number of Sideburns | 12-pin |
| Aft Mirror Angles Allowed | Up to 25° deadrise |
FAQs
Thru-hull installations require drilling a hole through the hull, which increases installation complexity and needs careful placement.
Install all transducers according to the included installation instructions to achieve best possible performance.
Install transducers according to the included instructions to ensure best performance.
Placement is more complex for external models due to fairing installation and orientation requirements.
Install external thru-hull types with a fairing in clean water, forward of propellers and running gear.
A thru-hull pair is recommended for mounting a SideVü transducer where the deadrise exceeds 5 degrees.
A fairing is usually required for external thru-hull transducers to ensure the transducer face is parallel to the waterline.
There are thru-hull transducers available for every hull material, ensuring broad compatibility.
Flush thru-hull transducers are designed to sit flush or nearly flush with the boat hull, minimizing drag.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
