Gain Precise Control of Your Autopilot
Get easy-to-use control of your Reactor™ 40 autopilot, and put simple, intuitive knob and button activation, heading changes and more at your fingertips.
Rotary Knob
The LED-encircled knob provides precise heading control and colored reference of autopilot status.
Autopilot Buttons
Dedicated engage and standby buttons make starting and stopping your autopilot easy.
Multipurpose Buttons
Add more autopilot control functions based on your vessel type and setup preferences.
Simple Installation
Connect to your NMEA® 2000 network with a single port and cable for integration and power.
Compact Design
A low-profile design matches the height of your GHC 50 instrument and GPSMAP® chartplotter. The APK 10 keypad accessory comes in horizontal and vertical mounting options to suit your new or existing helm.
Specifications:
General |
|
| Dimensions (WxHxD) | Vertical Flush mount: 1.6” X 6.2” X 0.28” (40.1 X 157.0 X 7.0 mm) Surface mount: 1.6” X 6.2” X 0.65” (41.1 X 158.0 X 16.4 mm) |
| Weight | Vertical: 3.5 oz (100 g) |
| Temperature range | From 5° to 158°F (from -15° to 70°C) |
| Material | Fully-gasketed, high-impact plastic |
| Water rating | IPX7 |
| Compass-safe distance | 4.5” (114 mm) |
| Powered input | Powered supplied from the NMEA 2000® network |
Content:
- APK 10 autopilot keypad (horizontal or vertical, depending on version selected)
- Backbone/drop cable (2 m) and T-connector for the NMEA 2000® Network
- Mounting hardware (flush and surface)
- Documentation
FAQs
Set Page Scaling to ‘None’ and ensure ‘Auto-Rotate and Center’ is checked to maintain correct template size.
Yes, a mounting template is provided in the product box. It is not recommended to print your own template.
If printing your own template, you must have paper and a printer large enough to print the entire template at the correct scale.
It is not recommended to print your own mounting template. Use the one provided in the product box.
Yes, make sure ‘Auto-Rotate and Center’ is checked to keep the template size accurate.
Not using the supplied template or incorrect printing may result in the cutout being too large or too small on your boat.
No, the manufacturer is not responsible for any damages or expenses resulting from a mounting template error.
Fusion is not responsible for any damages or expenses resulting from a miscut mounting surface due to improper template printing.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
