6
yachtseatworks.com
6
Home » Shop » Fish Finder Transducers » Airmar B75M — 0° Tilt (Garmin Edition)

Airmar B75M — 0° Tilt (Garmin Edition)

Original price was: $699.60.Current price is: $485.26.

Sale!
SKU: 010-11636-20 Category:
Share

This bronze helmet mount transducer is designed to allow both traditional and widened spectrum scanning when used with a compatible probe, such as the GSD™ 26 unit.

This 600 W transducer with 8 pins has a depth of 900 ft (274 m), an operating frequency of 80 to 130 kHz, a beam width of 24 to 16 degrees and a strut angle of between 0 and 7 degrees.

The transducer kit is supplied with the installation instructions. Follow the instructions carefully to avoid damage to the boat.

Technical specifications
Physical And Performance Characteristics
Frequency CHIRP (80-130 Khz)
Energy 600 W
Beam Width 24°/16°
Maximum Depth 900 ft (274 m)
Cable Length 39 ft (11,8 m)
DEPTH/SPEED/TEMPERATURE Depth and temperature
Number of Sideburns 8 pin
Aft Mirror Angles Allowed Strut from 0° to 7° degrees

FAQs

What should I do if I experience difficulty during installation?

If you encounter problems during installation, contact Garmin Product Support or seek a professional installer for assistance.

Should I use a thru-hull pair for some installations?

A thru-hull pair is recommended for SideVü transducers with deadrise over 5 degrees.

Are different hull materials supported for thru-hull installs?

Thru-hull transducers are available for every hull material type.

Where should I install a flush thru-hull transducer?

Flush thru-hull transducers are recommended for smaller boats with minimal deadrise; they sit nearly flush with the hull.

Why use a fairing block with external thru-hull transducers?

A fairing block aligns the transducer face with the waterline for the most vertical beam possible.

Are there different styles of thru-hull transducers?

Yes, thru-hull transducers come in flush and external styles. Flush versions sit nearly flush with the hull, recommended for smaller boats.

When is an external thru-hull transducer recommended?

External thru-hull transducers are designed for larger, untrailered vessels, often using a fairing block for vertical alignment.

Who do I contact for help with installation, servicing or advice?

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.